The University of New South Wales

go to UNSW home page

Handbook Home

PRINT THIS PAGE
Introduction to Petrophysics - PTRL2018
 Petrol1.jpg

   
   
   
 
Campus: Kensington Campus
 
 
Career: Undergraduate
 
 
Units of Credit: 6
 
 
EFTSL: 0.12500 (more info)
 
 
Indicative Contact Hours per Week: 6
 
 
Enrolment Requirements:
 
 
Prerequisite: PHYS1121,PTRL1010
 
 
CSS Contribution Charge:Band 5 (more info)
 
   
 
Further Information: See Class Timetable
 
  

Description

PTRL1010 is another Prerequisite required
Reservoir Rock and Fluid Properties: Porosity, Salinity, Permeability, Fluid Saturations, Darcy’s Law. The permeability coefficient. The measurement of permeability. Permeability of ‘dirty’ sands. Electrical and acoustic properties of reservoir rocks. Interpretation of fluid content data. Fundamentals of the behaviour of hydrocarbon fluids. PVT properties of oil-gas systems. Composition and phase diagrams of natural gases. Pseudo-critical properties of hydrocarbons. Surface tension and properties of the liquid and vapour phases. Properties of water and brines.
Laboratory Work: Experiments on porosity, permeability, capillary pressure, resistivity of reservoir rocks and PVT properties of crude oil. Introduction to the API standard laboratory equipment and their processes in measuring rock and fluid properties. Sample preparation from whole cores of different types of rock and shale. Understanding PVT properties of a mixture of hydrocarbon and their phase behaviour under different test conditions.
Well log interpretation: Fundamentals of petrophysics and interrelation between petrophysical parameters. Borehole environment. Invasion profiles and invasion characteristics. Hydrocarbon mobility. Acquisition of petrophysical data. Data quality assurance. Presentation of petrophysical data. Measurement of natural gamma rays. Formation waters. Importance of formation water characteristics. The SP curve. Wellsite log evaluation. Formation resistivities. Shallow and deep resistivity measuring devices. Porosity related measurements with well logs in clean and shaly sands. Sonic (Acoustic), Formation Density and Neutron logs. Practical work with well log, core analysis and well pressure data.


URL for this page:

© The University of New South Wales (CRICOS Provider No.: 00098G), 2004-2011. The information contained in this Handbook is indicative only. While every effort is made to keep this information up-to-date, the University reserves the right to discontinue or vary arrangements, programs and courses at any time without notice and at its discretion. While the University will try to avoid or minimise any inconvenience, changes may also be made to programs, courses and staff after enrolment. The University may also set limits on the number of students in a course.