The School offers a wide range of undergraduate and postgraduate programs in all areas of the professions of Electrical Engineering and Telecommunications. The School's undergraduate BE programs in both Electrical, Telecommunications and Photonic engineering continue to act as models for educating engineers in tomorrow's technology. Options within Electrical Engineering include: Telecommunications, Photonics, Systems and Control, Energy Systems, Microelectronics, Signal Processing. The Degree programs are accredited by the Institution of Engineers Australia as meeting the requirements for admission to graduate membership.

A vibrant Co-op program is offered for Electrical Engineering and Telecommunications students. Co-operative scholarships are funded by Australia's premier industries.

The undergraduate curricula are being progressively revised to provide flexible training to suit the future needs of students. Individual student needs can be further met by substitution provisions within the programs.

Students have the option of completing combined programs leading to the award of the Bachelor of Engineering in Electrical Engineering or Telecommunications in combination with a BSc, BA or BCom degree or a concurrent program for BE and the Master of Biomedical Engineering.

Note

Electrical Engineering is also available as a component of the combined degree programs
BE(Elec Eng)/BSc program 3725 program 3725
BE (Elec Eng)/BA, program 3720 program 3720
BE(Elec Eng)/BCom, program 3715
program 3715
and as a concurrent program
BE (Elec Eng)/MBiomedE, program 3727program 3727
and as a fast track program
BE(Elec Eng)/MEngSc, program 3640 (plan ELECD13640)plan ELECD13640

For details of all academic requirements for this program, see http//www.eng.unsw.edu.au/rules/

Please see
http//www.eng.unsw.edu.au/rules/

The program structure below gives one sequence of courses that fulfils the requirements of the degree. The timing of the general education courses and elective courses may be modified to optimize the student's choice of courses. Suggestions for other course sequences consistent with timetabling and availability can be found on the School website at www.eet.unsw.edu.auWhile some courses are given twice a year, many courses are given only once a year. In addition, courses may have prerequisites and exclusions. Thus students should plan their enrolments appropriately.

PLEASE NOTE:

Plus choose 2 electives from the Year 1 Elective List
http://www.eng.unsw.edu.au/rules/elective.htm

Suggested Year 1 electives for this program are:

For information relating to Years 2-4 of the flexible program structure please refer to the school website http://www.eet.unsw.edu.au

PROGRAM STRUCTURE FOR STUDENTS WHO ENROLLED PRIOR TO 2006 IS AS FOLLOWS:

Year 2

And TWO General Education courses in Session 1 and TWO General Education courses in Session 2 also.

Note: MATH2620 and MATH2111 may be taken at the ordinary level (MATH2520 and MATH2011).

COMP1011 and COMP1021 may be taken at the higher level (COMP1711 and COMP1721).

TWO Electives from:

Students who intend to major in particular disciplines should note that certain Year 3 elective courses may be prerequisites for the Professional Electives they choose in Year 4.

COMP2011 may be taken at the higher level (COMP2711).

And THREE Professional Electives

Session 2

And TWO Professional Electives

Note: The Thesis may only be taken by students with an Honours-level weighted average at the end of Year 3. Other students enrol in the Group Thesis (ELEC4914 and ELEC4915).

Students who intend to major in particular disciplines should note that certain Year 3 elective courses may be prerequisites for the Professional Electives they choose in Year 4.

COMP2011 may be taken at the higher level (COMP2711).

Professional Electives

Microelectronics

Professional Elective courses in Computer Systems area require either COMP2011 or COMP2021 as a prerequisite.

Because of timetable clashes, not all combinations of courses are possible.

The program selected by each student must be approved by the Head of School. Not all electives are offered each session, nor is the full range available to part-time students. Students are advised each year of the timetable of available electives.

In order to effectively broaden students' non-technical skills and knowledge, the students must complete 12 UOC of general education, normally in the form of four 3 UOC courses from four different schools. However, one 6 UOC course (e.g. a language) from a single school may be taken provided the further two 3 UOC courses are taken from different schools. The School maintains a list of courses that cannot be taken by students towards their 12 UOC general education quota. These courses are technical in nature and overlap with the core program content.

General education courses must be taken at UNSW. Exemptions are not given for students taking such courses from other institutions or educational organizations without prior consent from the School. Credit for general education courses taken at other institutions before commencing studies at UNSW will not be permitted. The exception to this rule is advanced standing students who have completed suitable substitutes as deemed acceptable by the School.

Please see http//www.eng.unsw.edu.au/rules/

Please see http//www.eng.unsw.edu.au/rules/

For information regarding fees for UNSW programs, please refer to the following web-page:  https://my.unsw.edu.au/student/fees/FeesMainPage.html

All students are required to undertake mandatory industrial training. Each student is personally responsible for arranging and completing the full 60 days compulsory industrial training prescribed as part of the requirements for the award of the degree. Industrial training should be concurrent with enrolment and is best accumulated in the summer recesses at the end of the second and third years of the program, but it must be completed before graduating. Industrial training should be in the area of engineering design and/or project work, but limited credit may be given for work of a non-engineering nature. It is preferable that all 60 days be completed with one or two organisations. Students should, in general, work with professional engineers and take an active part in their work in the design of equipment, solving of engineering problems, or any other work that is relevant to the profession of Engineering.

Students are required to submit a written report on their industry placements, typically 2000-3000 words, describing the organisation of the Company, summarising the work done and the training received. The report must be accompanied by certification of their industrial placement by a senior company representative.

Industrial Training will be assessed as a compulsory part of the course ELEC4122 Strategic Leadership and Ethics. Students must complete the industrial training requirement in order to receive a completed assessment for this course, but the industrial training assessment does not affect the mark received for ELEC4122.

Rules governing substitutions, pre-requisites and student exchanges

To suit the special abilities or needs of individual students a limited number of course substitutions are permitted within each program. Any such substitution must have prior approval of the Head of School.

Substitutions must be of at least the same length and level as the prescribed course.
Core courses may not be substituted with other courses.
Substitution is not normally permitted if it unduly restricts the range of courses studied to only one area of specialisation.
Progression to 'next level' courses is not permitted without satisfying the nominated pre-requisites.
In the case of a combined degree program, accreditation of any course in more than one program is not permitted.
Prior School consent is required for any accredited substitution. This includes any courses taken from other schools at the student's own initiative.
Substitution is not normally permitted in the first two years of the program.
Substitution of one postgraduate course within the School is permitted, provided a similar course is not offered at the undergraduate level.
Student exchanges are permitted, and students are encouraged to organise their exchange in the second session of their third year in order to simplify the process of accrediting substitutions.

Rules Governing Elective Courses
24 units of credit from the School's L3 and L4 elective lists provide the breadth and the depth required for an Electrical, Telecommunications and Photonic Engineering Degree. These electives are provided from the six disciplines within the School. In addition, L3 electives include courses from other Schools. Students must have completed at least 36 units of credit of Year 4 core and L4 elective courses in order to satisfy the requirements for graduation. Therefore students should choose their L3 and L4 electives accordingly.

Note: Students are not permitted to count more than 60 units of credit (excluding the 12 units of credit of general education courses) of Year 1 courses toward the degree, as the required breadth and depth of the Electrical/Telecom/Photonics engineering program would not be obtained otherwise.

Transfer from Other Programs/Advanced Standing Students/Mid-Year Entry
The introduction of year 1 (L1), year 3 (L3) and year 4 (L4) electives accommodates students who are transferring from another program, are advanced standing or are in mid-year entry, as it allows them to complete required number of units of credit within the stipulated time of the normal program.