Aeronautical Eng (Hons) (CDF) - 4476
Program Summary
Faculty: UNSW Canberra at ADFA
Contact: UNSW Canberra, Student Administrative Services
Campus: UNSW Canberra at ADFA
Career: Undergraduate
Typical UOC Per Semester: 24
Min UOC Per Semester: 6
Max UOC Per Semester: 24
Min UOC For Award: 192
Domestic Entry Requirements: See Domestic Entry Requirements
International Entry Requirements: See International Entry Requirements
Award(s):
Bachelor Of Engineering (Honours) (Chief of Defence Force Students Program)
View program information for previous years
Program Description
In Year 1 of the program students will be engaged with cohort activities so as to develop and maintain their interest and continuing involvement in the program via invited lectures, seminars, general reading and social events.
Commencing in Year 2, the research projects, each offered as separate courses, will be supervised by academic staff from the same or closely related discipline. Students in the research courses may work independently or as part of a team, depending on the nature of the project undertaken, though all students will submit individual assessment. Final assessment, due by the end of semester, will be based on a written paper and an oral presentation.
The Bachelor of Engineering (Honours) (CDF) in Aeronautical Engineering is of four years duration, and the degree may be awarded at Honours Class I, Honours Class II, Division I or Honours Class II, Division II. These Honours levels will be displayed on the final testamur. Candidates who do not achieve Honours Class 1 or 2 will receive a Bachelor of Engineering (Honours) (CDF) in Aeronautical Engineering with no honours level displayed.
The Program is accredited by Engineers Australia.
Program Objectives and Graduate Attributes
The program extends the educational principles embodied in the Bachelor of Engineering (Honours) in Aeronautical Engineering to a higher level of the degree. In the program, students will be exposed in first year to research methods in Engineering and will be offered significant extensions to the ideas and analysis performed in the standard degree program. This will allow them to undertake research projects. This will allow them to undertake research projects over the course of the degree at the appropriate level, thereby more fully integrating research into the standard undergraduate degree. The individual projects undertaken in close association with academic staff on research topics of mutual interest underpin the program and give the students the ability to develop their full potential.
Program Structure
- ZEIT1500 Statics (6 UOC)
- ZEIT1502 Dynamics (6 UOC)
- ZEIT1901 Eng Research 1A (6 UOC)
- ZEIT1902 Eng Research 1B (6 UOC)
- ZPEM1303 Engineering Mathematics 1A (6 UOC)
- ZPEM1304 Engineering Mathematics 1B (6 UOC)
- ZPEM1501 Physics 1A (6 UOC)
- ZPEM1502 Physics 1B (6 UOC)
- ZEIT2500 Thermofluids (6 UOC)
- ZEIT2501 Mechanical & Electronic Design (6 UOC)
- ZEIT2502 Fundamentals of Flight (6 UOC)
- ZEIT2503 Fluid Mechanics (6 UOC)
- ZEIT2504 Mechanics of Solids (6 UOC)
- ZEIT2901 Eng Research 2A (6 UOC)
- ZPEM2309 Engineering Mathematics 2A (6 UOC)
- ZPEM2310 Engineering Mathematics 2B (6 UOC)
- ZEIT3500 Engineering Structures (6 UOC)
- ZEIT3501 Engineering Materials (6 UOC)
- ZEIT3503 Aerodynamics (6 UOC)
- ZEIT3504 Aircraft and Systems Design 1 (6 UOC)
- ZEIT3505 Flight Dynamics & Aircraft Con (6 UOC)
- ZEIT3901 Engineering Research 3A (6 UOC)
- ZEIT3902 Engineering Research 3B (6 UOC)
- ZINT2100 Intro to Cyber-Security (6 UOC)
- ZEIT4502 Aircraft and Systems Design 2 (6 UOC)
- ZEIT4503 App Thermodynamics & Prop (6 UOC)
- ZEIT4901 Engineering Research 4A (12 UOC)
- ZEIT4902 Engineering Research 4B (12 UOC)
Academic Rules
These regulations apply to all undergraduate degrees and are to be used in conjunction with Academic Rules and Program Information. All rules in this Handbook apply to each student who enters an undergraduate program in 2016. The rules remain applicable until the student exits their program, either by discontinuation or graduation. Students who entered a program in another year should consult the rules and regulations for that year.
Please refer to Faculty Regulations information
A student must comply with the Faculty Regulations for Undergraduate Students. In the event of a conflict, the rules for the Bachelor of Engineering (Honours) in Aeronautical Engineering take precedence over the Faculty Regulations for Undergraduate Students.
2. Degree Requirements
2.1 The degree of Bachelor of Engineering (Honours) in Aeronautical Engineering shall be conferred as a Bachelor Honours degree at Level 8 in the AQF. Honours in recognition of meritorious performance may be awarded in the following categories:
Honours Class I
Honours Class II, Division I
Honours Class II, Division II
Where candidates do not achieve Honours Class 1 or 2, the Class of Honours is not displayed.
2.1.1 The Class of Honours is calculated as follows:
Honours Class 1: Honours WAM of at least 80.0 and Thesis Mark of at least 65
Honours Class 2 Division 1: Honours WAM of at least 75.0 and Thesis Mark of at least 65
Honours Class 2 Division 2: Honours WAM of at least 65.0 and Thesis Mark of at least 65
Courses will be weighted according to the following:
Foundation ie Level 2 and 3 courses | Disciplinary ie Level 4 courses (not including final year projects) | Thesis ie Final year projects | 1 | 2 | 3 |
2.2 To qualify for the degree of Bachelor of Engineering (Honours) (CDF) in Aeronautical Engineering, a candidate shall normally be enrolled for a minimum of eight sessions and gain a minimum of 192 units of credit (normally 24 units in each full-time session).
2.3 A candidate completing a Standard Program shall complete courses, in the years prescribed, for all engineering students and those pertaining to one particular branch of engineering as set out in the relevant schedule.
2.4 A candidate completing a Non-Standard Program shall, subject to the requirements of Rule
2.5 (below), timetabling requirements and the approval of the appropriate Heads of School, be permitted to enrol in any one year in courses selected from more than one year of the relevant schedule.
2.5 Before a candidate’s enrolment will be accepted for any course, the candidate must have completed the relevant prerequisite courses shown in the Course Catalogue, except where the Course Authority for the appropriate course approves otherwise.
2.6 A student for enrolment for the degree of Bachelor of Engineering (Honours) (CDF) in Aeronautical Engineering shall hold a Australian Tertiary Admission Rank (ATAR) or equivalent, of no less than 98.
2.7 A student for the degree of Bachelor of Engineering (Honours) in Aeronautical Engineering may, at the discretion of the Head of School, transfer to the degree of Bachelor of Engineering (Honours) (CDF) in Aeronautical Engineering upon completion of 24 units of credit with a WAM of 85 or greater in semesters 1 or 2 of the Year 1 program.
2.8 To qualify for the degree of Bachelor of Engineering (Honours) (CDF) in Aeronautical Engineering, a student shall usually maintain a sessional Weighted Average Mean (WAM) of 80.
2.9 Usually, a student who does not comply with the requirements of Rule 2.8 (above) shall be transferred to candidature for the degree of Bachelor of Engineering (Honours) in Aeronautical Engineering, although exceptions maybe made at the discretion of the Head of School. Such review will occur at the end of each semester.
2.10 Rule 2.9 above shall not usually be invoked for students with Potential Graduand status.
3. Practical Experience Requirements
Before graduation a candidate shall complete 60 days of approved practical engineering experience which must be done in blocks of at least 20 working days each, each block being in the service of a single employer.
Service Training and Practical Experience Requirements
Service training conducted during the degree program is recognised as partially satisfying practical experience requirements in the following ways:
Naval Midshipmen, 30 days for experience gained at a defence establishment between second and third years. (Time at sea prior to arrival at UNSW Canberra at ADFA is not eligible for consideration.)
Army Cadets, 30 days for the year spent at Royal Military College between third and fourth years.
Air Force Cadets, 30 days for experience gained at a defence establishment between second and third years.
Fees
Related Program(s)
4472 Aeronautical Engineering (Hon)